When installing a cooling tower, it is necessary to select a suitable installation location according to the various conditions of the equipment and ensure that the ground has sufficient load capacity. At the same time, external conditions such as ventilation should also be considered. During the installation process, a horizontal steel plate should be pre-buried as the foundation according to the specified size, and the elevation of each foundation point should be ensured to be on the same horizontal plane. The tower body should be placed horizontally to prevent the chassis from being crushed. When installing the tower shell, chassis and other components, in order to prevent deformation, screws can be inserted first and then tightened step by step. In addition, care should be taken to avoid poor ventilation and humid air backflow to ensure that the cooling capacity of the cooling tower is not affected.

Usually, the cooling tower is installed on the roof of the refrigeration station to form a high pressure head to overcome the resistance loss of the condenser. The water pump draws cooling water from the pool and sends it to the cooling tower for cooling treatment. The cooled water is then pressed into the condenser by gravity for circulation. During installation, it is necessary to position it according to the coordinate position specified in the construction drawing, and level and align it to ensure that the equipment is stable and firm. At the same time, attention should also be paid to whether the direction and position of the outlet pipe and nozzle of the cooling tower are correct.

In addition, when selecting and calculating, you need to provide the specific model of the cooling tower, the flow rate handled per hour, the inlet temperature and the outlet water temperature. At the same time, you also need to explain what equipment is cooled, whether there is a circulating water pool on site, and what the installation conditions are. If spare parts or other accessories are required, they must also be noted when selecting. For special use environments and situations, detailed descriptions are also required in order to select the appropriate cooling tower model. During operation, it is necessary to monitor and record operating parameters such as cooling water temperature difference, cooling amplitude, efficiency, etc. to ensure the normal operation and efficient performance of the cooling tower.