Industrial installation instructions for FRP cooling towers? Glass fiber reinforced plastic cooling tower is a type of closed cooling tower. As a type of installation that uses repeated cooling of water to attract thermal energy to raise the temperature of water, it is widely used.

FRP cooling towers are mostly made of polyester FRP. Because it is used in the open air, the effects of water resistance and aging resistance must also be considered. It is better to add fiber-reinforced materials to manufacture the glass fiber reinforced plastic cooling tower shell. It is better to use glass fiber exterior felt with high natural resin content, and pay attention to the following points in specific installation.

1. The place where the FRP cooling tower is installed is generally a roof or a place with air circulation. For some special requirements, a sunken installation can also be used. Do not install too close to the waterproof channel, high volume wall that is easy to reflect the volume, and pay attention to the distance between the tower body and the external wall.
2. Two or more FRP cooling towers can be used in series, but the distance between the towers should be paid attention to.
3. It should not be installed in a place with poor ventilation, especially in a sealed place.
4. Pay attention to installing in a clean environment. Although the closed cooling tower is closed, if it is installed in a place with soot and dust, it may be blocked.
5. Pay attention to the surrounding environment. Be careful not to get close to hot places such as kitchen and boiler room while preventing fire.